SC300 toggle valve

 

With switchable flow rate for filling steel cylinders at full speed and composite cylinders at reduced speed

 

SC300 toggle valve
Article numbers:see below  

 

Why use the SC300 toggle valve?

The SC300 toggle valve makes it simple to switch the air flow rate from full speed for filling steel cylinders to no more than 700 l/min for filling composite cylinders. By means of an easy-to-operate lever, the flow rate can be set from HIGH (full speed) to LOW (up to 700 l/min), and vice versa.

Optionally, the toggle valve is also available with a gauge showing the current cylinder pressure.

Most cylinder filling panels can easily be retrofitted with SC300 toggle valves.

Flow-rate lever Cylinder filling panel with two SC300 toggle valves

Flow-rate lever

Cylinder filling panel with two SC300 toggle valves

 

Flow-rate lever
position HIGH
Flow-rate lever
position LOW
SC300 with a
pressure gauge
Flow-rate lever (position HIGH) Flow-rate lever (position LOW)

SC300 with pressure gauge

Maximum flow rate for filling
steel cylinders at full speed
Reduced flow rate for filling composite cylinders at no more than 700 l/min Gauge showing the
current cylinder pressure

Scope of delivery

  • SC300 toggle valve
  • 300-bar filling connector

Specifications

body: chromium-plated brass
flow-rate lever: plastic
dimensions (w x h x d): 70 x 125 x 150 mm
mounting thread: G 5/8" (outside)
connector thread: G 1/4"
high-pressure connector: DIN 477
max. flow rate in LOW position: 700 l/min

Article numbers

SC300 toggle valve 330-405
Cylinder-pressure gauge for SC300 330-523

Downloads

Product flyer
   
© Resposible for the site's content: Andreas MENZL / Fritz MENZL. Errors and omissions excepted. Subject to change without notice.